Product Introduction
Main Features
Dynamic Distribution
Our system delivers power to each charging station dynamically - which both reduces the charge time per vehicle and increases each charger’s daily availability.
High Efficiency
Our dynamic delivery of fast charging power means each vehicle spends less time at the charging station and more on the road.
High reliability
With a full system operating range of -40˚C to +50˚C (-40F to 122F), our chargers are designed to withstand all weather conditions in any climate
Cost-Effective
Delivering the lowest cost per kW on the market
Detailed diagram

Excellent performance advantages
● Spends less time at the charging station and more on the road.If one vehicle is being charged, it can take upto the full power of 360kW at any stall. Power can be distributed between two vehicles based on demand. Three vehicle can takeequal power of 120 kWor based on demand per vehicle.
● We build beautifully simple EV power infrastructure from scratch—using hard-wearing parts engineered in-house and streamlining expensive or unnecessary features where possible—to lower capital costs and extend the overall life of your system.
Techdata Sheet
| Model No. | MIDA-EU-360KW | |
| DC output |
Input Voltage | DC 200-1000V |
| Out Current | CCS2: Max250A GBT: Max250A | |
| Connector types | CCS2/GBT | |
| Connector line length | Car:4.5m Bus:6m(Optional length) |
|
| Efficiency |
≥95%(Load rate≥50%) | |
| AC input | Input Voltage | AC400V±10%, 3P+N+PE |
| Frequency | 45-65Hz | |
| Power factor | ≥0.99(Load rate≥50%) | |
| THDi | ≤5%(Load rate≥50%) | |
| Operating environment | Humidity | 5%~95%(no condensing) |
| Altitude | ≤2000m | |
| Operation Temperature | -40°C~+60°C(below -30°C and above 55°C derating operation) | |
| Mechanical Specifications | Protection Rating | IP55 |
| Wiring Method | Bottom incoming | |
| General Specifications | User interface | Floor mounted LED+7"LCD screen Advertising LED+32"+4.3"LCD screen |
| Start mode | APP/ RFID (Optional) | |
| Communication Interface | Ethernet/4G(Optional)/WIFI(Optional) | |
| Charging standards | IEC 61851-1 IEC 61851-23 IEC 61851-21-2 | |
description2
Advantages
Super High Power
Single connector rated current 500A . The maximum charging power is 500kW
High Security
Insulation silicone oil is used as the heat dissipation medium. Even if there is a liquid leak, there will be none risk of short circuit.
High Protection
Separate compartment design of electrical parts and heat dissipation system.Electrical components are not affected by external environmental factors.
Strong Compatibility
Compatible with full series of charging host, like prefabricated charging cabinets and box type charging cabinets, etc.

Portable EV Charger
Home EV Wallbox
Floor Mounted EV Charger
Floor Standing DC Charger Station
AC-DC Charging Module
DC-DC Charging Module
WeChat
Whatsapp



