240kW 360kW 480kW Floor Mounted Ultra Fast DC Charger Liquid Cooled Fleet Depot

Overview

Designed around uptime, the 240kW / 360kW / 480kW DC fast charging station handles peak demand at busy charging hubs. Featuring twin CCS2 outlets, the charger uses dynamic power sharing to balance load across both charging positions.

Full OCPP support enables remote monitoring, billing integration and firmware updates across distributed sites. As a commercial EV charger, the 240kW / 360kW / 480kW DC fast charging station is designed for CCS2 dual-gun operation, delivering fast, dependable direct-current charging for electric cars, vans and light trucks at high-traffic locations. A rugged floor-standing design protects sensitive electronics behind a sealed enclosure, while front and rear service access simplifies commissioning and upkeep. The layout supports side-by-side deployment to build out multi-stall charging plazas over time.

Key Advantages

The 240kW / 360kW / 480kW DC fast charging station combines efficient power conversion, rugged construction and network intelligence to deliver measurable value for commercial operators.

• Compliance with IEC 61851 and related international standards supports safe, standardized deployment across multiple markets and simplifies certification, permitting and interconnection with local grid and network requirements.
• Real-time remote diagnostics and event logging reduce truck rolls and shorten mean time to repair, giving operators actionable visibility into uptime, faults and energy dispensed across an entire distributed charging network.
• A liquid-cooled thermal and cable design allows sustained high charging current without thermal derating, keeping charge times short during peak use while enabling lighter, more flexible connector cables for easier handling.
• Smart load balancing coordinates multiple units on a shared feeder so the site never exceeds its contracted grid capacity, avoiding costly demand charges and enabling higher charger density on constrained electrical services.
• Robust cable management with retractable holsters and ergonomic, lightweight connectors improves the driver experience and reduces wear at busy hubs, lowering connector replacement frequency and total cost of ownership.
• A wide DC output voltage range and broad input voltage tolerance keep output stable under fluctuating grid conditions and support both 400V and 800V vehicle platforms from a single dual-gun charging station.

High-Power DC Fast Charging

This floor-mounted DC fast charging station delivers ultra-fast charging with dual CCS2 connectors and dynamic power sharing, keeping commercial fleets and public EVs ready in minutes.

Intelligent Power Management

Modular power modules and intelligent load balancing allocate available power across both guns in real time, maximizing station utilization and reducing waiting time.

CCS2 and OCPP Ready

CCS2 connectors and OCPP 1.6J/2.0.1 communication enable seamless integration with charging network platforms, supporting cars, buses and trucks on public and fleet networks.

Rugged Commercial Design

An IP54 weatherproof cabinet, wide operating temperature range and global CE/TUV certification ensure reliable 24/7 operation at highways, depots and commercial parking.

Technical Specifications

The following specifications summarize the core electrical and environmental parameters of this dual-gun CCS2 commercial EV charger.

Application Scenarios

Flexible 240kW / 360kW / 480kW output and dual-gun CCS2 charging make this floor-mounted station suitable for a wide range of commercial deployments.

• Public charging hubs and destination sites, where high availability, throughput and remote OCPP management are essential to serving unpredictable demand.
• Retail, hospitality and roadside service locations, where fast charging attracts dwell-time customers and strengthens footfall for the host business.
• Highway service areas and motorway rest stops, where rapid turnaround keeps long-distance travelers moving and dual-gun CCS2 output serves two vehicles during short stops.
• Commercial parking facilities at offices, shopping malls and mixed-use developments, where dependable DC fast charging adds tenant value and generates recurring revenue.
• Fleet depots charging delivery vans, taxis, ride-hail cars and logistics vehicles, where dynamic power sharing and OCPP scheduling optimize overnight and between-shift charging.

As a MIDA commercial DC fast charger, the unit balances proven power electronics, robust construction and network-ready intelligence to deliver reliable fast charging at scale.

Related MIDA DC charging solutions: 60kW 120kW 180kW Floor Mounted DC, 120kW 150kW Floor Mounted DC Fast, 80kW 120kW 160kW Commercial DC Fast, 150kW 180kW 240kW Floor Mounted DC.

Frequently Asked Questions

What power ratings are available for these DC fast charging stations?

MIDA floor-mounted DC fast chargers are available in modular ratings from 60kW up to 480kW, including popular 120kW, 180kW, 240kW, 300kW, 360kW and 400kW configurations. The modular power design lets operators start small and scale up by adding power modules as charging demand grows.

Which connectors and protocols do the DC fast chargers support?

The stations use CCS2 connectors (CCS1, CHAdeMO or GB/T optional) and communicate via OCPP 1.6J / 2.0.1, ensuring seamless integration with charging network management platforms and compatibility with virtually all electric vehicles.

How fast can a 120kW to 480kW DC charger charge an electric vehicle?

A 120kW DC fast charger can add around 100km of range in 10-15 minutes, while 240kW-480kW ultra-fast stations can charge a compatible EV from 20% to 80% in as little as 15-20 minutes, depending on the vehicle battery and state of charge.

Are these DC charging stations suitable for outdoor commercial use?

Yes. Every unit uses a rugged IP54 (IP55 optional) weatherproof enclosure with a wide -30C to +55C operating range, dust and corrosion protection, and dynamic thermal management for reliable 24/7 operation at highways, fleet depots and public parking.

Do the DC fast chargers support dual-gun simultaneous charging?

Yes. Dual-gun models charge two electric vehicles at once with intelligent dynamic power sharing, automatically allocating available power between connectors to maximize station utilization and reduce waiting time.

Does MIDA offer OEM/ODM customization and certification support?

MIDA provides OEM/ODM customization of power, connectors, payment systems, branding and enclosure, backed by global certifications (CE, TUV) and remote diagnostics, so operators can deploy compliant charging infrastructure in any target market.