200kWh 120kW Liquid Cooled DirectCurrent Charger Battery Storage High Power Fleet Infrastructure Deployment Commercial

Overview

As a self-contained solar-storage EV charging station, the MIDA 200kWh 120kW unit pairs high-density LFP battery cells with a bidirectional power conversion system to balance renewable generation, storage, and dispensing. The integrated EV charger is designed for commercial fleet depots and public sites where grid capacity is constrained. Solar PV input feeds the energy storage bank, an intelligent EMS orchestrates peak shaving, and CCS2 dispensing delivers rapid, reliable direct-current charging in both grid-connected and off-grid modes.

Delivering 200kWh of dispatchable energy and 120kW of clean power, this PV BESS charging station lets operators manage demand charges, extend transformer life, and accelerate fleet electrification. The 200kWh LFP battery bank stores abundant solar generation, and the 120kW bidirectional PCS delivers fast, flexible dispensing. Combined with intelligent peak shaving and off-grid readiness, the integrated EV charger offers a resilient, low-cost path to commercial fleet charging infrastructure. Standardized CCS2 dispensing and OCPP connectivity simplify network integration and billing. With modular scalability and factory pre-integration, the solar-storage EV charging station adapts to evolving site loads and supports long-term, sustainable transportation electrification goals.

Key Advantages

• The bidirectional PCS enables both grid-connected and off-grid operation, supporting seamless islanding and smooth transitions that keep charging active during utility outages.
• An intelligent EMS with peak shaving and load shifting lowers demand charges and optimizes solar self-consumption across the entire charging site for measurable energy savings.
• MPPT solar input maximizes photovoltaic harvest, feeding renewable energy directly into the storage bank and connected electric vehicles to reduce grid dependence.
• The CCS2 connector and OCPP 1.6J protocol ensure broad vehicle compatibility and effortless integration with commercial charging network and back-office platforms.
• A modular, scalable design lets commercial fleet operators expand storage and charging capacity incrementally as their electrification demand grows over time.
• Remote monitoring and diagnostics reduce on-site maintenance visits and improve uptime across widely distributed charging infrastructure deployments.

Integrated Solar + Storage Charging

This integrated PV BESS charging station combines solar generation, lithium battery storage and DC fast charging in one system, delivering clean, resilient energy for commercial EV fleets and microgrids.

Peak Shaving and Demand Management

Intelligent energy management stores low-cost and solar power in the battery and discharges it during peak demand, reducing demand charges, easing grid load and avoiding costly infrastructure upgrades.

Off-Grid and Grid-Connected Modes

Operating both off-grid and grid-connected, the station charges electric vehicles reliably even where grid capacity is limited, making it ideal for remote depots and renewable microgrid deployments.

Safe, Rugged and Certified

Automotive-grade LFP cells, a multi-level BMS, thermal management and an IP54/IP55 weatherproof cabinet ensure safe 24/7 commercial operation, backed by global certification and remote monitoring.

Technical Specifications

Application Scenarios

• Microgrid and industrial parks combining photovoltaic generation with BESS charging infrastructure for resilient, low-carbon energy supply.
• Highway corridors and destination sites needing resilient direct-current fast charging that stays online during grid instability.
• Municipal transit and bus depots pursuing zero-emission fleet electrification goals with integrated solar and storage assets.
• Retail, hospitality, and workplace parking deploying solar PV plus storage to offset energy consumption and attract EV drivers.
• Commercial fleet depots seeking dependable solar-storage EV charging while minimizing grid demand charges and avoiding costly transformer upgrades.

Related MIDA energy storage charging solutions: 200kWh 120kW Intelligent Solar Storage EV, 200kWh 120kW CCS2 Direct Current Fast, 200kWh 120kW Factory Direct Solar Storage, 261kWh 120kW Integrated Solar Storage EV.

Frequently Asked Questions

What battery capacity and charging power options are available?

MIDA integrated PV BESS EV charging stations are available in 120kWh/60kW, 200kWh/120kW, 261kWh/120kW, 418kWh/180kW and 522kWh/240kW configurations. The battery capacity (kWh) buffers solar and grid energy, while the charging power (kW) determines how fast connected electric vehicles are charged.

How does the solar + storage integrated charging station work?

The system combines photovoltaic input, a lithium iron phosphate (LFP) battery pack, a bidirectional PCS and an intelligent EMS. Solar energy is stored in the battery during the day and released to charge EVs on demand, reducing grid dependence and enabling fast charging even where grid capacity is limited.

Can the BESS charging station operate off-grid or grid-connected?

Yes. Both modes are supported. In grid-connected mode it performs peak shaving and demand-charge management; in off-grid mode the solar array and battery storage power EV charging independently, making it ideal for remote fleets, microgrids and areas with weak grid infrastructure.

How does energy storage reduce charging costs and demand charges?

The battery charges when electricity is cheap or from solar, then discharges during peak charging periods. This peak-shaving and load-shifting lowers demand charges, avoids costly grid upgrades and maximizes self-consumption of renewable energy, improving the total return on investment.

Is the lithium battery safe for commercial deployment?

Yes. MIDA uses automotive-grade LFP (LiFePO4) cells with a multi-level BMS, temperature monitoring, fire suppression and IP54/IP55 weatherproof enclosures, complying with IEC/UL safety standards for reliable 24/7 commercial and fleet operation.

Where are integrated BESS EV charging stations typically used?

They are ideal for commercial fleet depots, highway service areas, microgrids, remote and off-grid sites, logistics parks and locations with constrained grid capacity, delivering fast, clean and resilient EV charging with solar self-generation and energy storage.