120kWh 60kW Solar Storage Charging System With DC Charger Renewable Transport Infrastructure Deployment Projects

Overview

The 120kWh 60kW Solar Storage Charging System With DC Charger Renewable Transport Infrastructure Deployment Projects is a compact solar energy storage system that couples photovoltaic input, an 120kWh LFP battery, and a 60kW DC charger in one weatherproof cabinet. This PV BESS charging station shortens installation time and reduces balance-of-system costs for renewable transport projects. Delivered as a pre-engineered unit, it removes the integration risk of matching separate inverters, batteries, and chargers, allowing faster commissioning and predictable field performance.

Peak shaving, off-grid operation, and remote EMS monitoring extend the value of this integrated EV charger far beyond simple energy transfer. The LFP battery and bidirectional PCS enable both self-consumption of solar power and grid support for resilient commercial charging. Site operators benefit from a pre-integrated 120kWh storage block that arrives factory-tested, reducing commissioning time and eliminating the complexity of matching third-party inverters, batteries, and chargers.

Key Advantages

• Integrates on-site solar PV, LFP battery storage, a bidirectional PCS, and DC charging within one weatherproof cabinet, forming a truly turnkey PV BESS charging station that shortens installation and reduces balance-of-system cost.
• Automated peak shaving discharges stored solar energy during high-tariff periods and recharges when rates fall, cutting utility demand charges and improving the payback period for commercial fleet operators.
• Supports both off-grid and grid-connected operation, seamlessly islanding during outages and synchronising back to the grid, enabling flexible commercial fleet deployment across sites with weak or intermittent utility supply.
• LFP (LiFePO4) chemistry paired with an intelligent BMS delivers superior thermal stability, long cycle life, and multi-layer protection against overcharge, over-temperature, and short-circuit conditions.
• Delivers fast DC charging through a CCS2 connector, sustaining rapid commercial vehicle turnaround even where the grid connection alone could not support the full charging power.
• Cloud-based EMS enables remote monitoring, diagnostics, energy scheduling, and firmware updates, giving operators complete visibility of solar yield, battery state, and charging sessions from any location.

Integrated Solar + Storage Charging

This integrated PV BESS charging station combines solar generation, lithium battery storage and DC fast charging in one system, delivering clean, resilient energy for commercial EV fleets and microgrids.

Peak Shaving and Demand Management

Intelligent energy management stores low-cost and solar power in the battery and discharges it during peak demand, reducing demand charges, easing grid load and avoiding costly infrastructure upgrades.

Off-Grid and Grid-Connected Modes

Operating both off-grid and grid-connected, the station charges electric vehicles reliably even where grid capacity is limited, making it ideal for remote depots and renewable microgrid deployments.

Safe, Rugged and Certified

Automotive-grade LFP cells, a multi-level BMS, thermal management and an IP54/IP55 weatherproof cabinet ensure safe 24/7 commercial operation, backed by global certification and remote monitoring.

Technical Specifications

The following specifications define the core performance envelope of the 120kWh, a PV BESS charging station built for continuous commercial fleet duty.

Manufactured in compliance with IEC 61851 for EV charging and IEC 62619 for industrial lithium battery safety, the 120kWh 60kW station combines certified quality with field-proven durability. The IP54/IP55 enclosure and wide -20°C to +55°C operating range allow outdoor installation across varied climates, while OCPP 1.6J connectivity ensures the integrated EV charger interoperates with leading charge-point management and billing platforms for scalable network operation.

Application Scenarios

• Bus and truck depots optimising overnight and opportunity charging with solar-buffered power to smooth grid draw.
• Motorway rest stops adding solar-buffered DC fast charging that maintains throughput without costly grid reinforcement.
• Campus and industrial microgrids integrating storage and EV charging to raise renewable self-consumption.
• Off-grid mining, agricultural, or island sites without stable utility power relying on autonomous solar storage.
• E-commerce logistics hubs scaling last-mile fleet electrification with predictable, low-carbon charging.

As a self-contained solar-storage charging solution, the 120kWh 60kW Solar Storage Charging System With DC Charger Renewable Transport Infrastructure Deployment Projects pairs 120kWh of LFP capacity with 60kW DC charging to accelerate renewable transport deployment. Its turnkey design, peak-shaving intelligence, and CCS2 compatibility make it an efficient, scalable choice for commercial fleets pursuing lower costs and cleaner operations.

Related MIDA energy storage charging solutions: 120kWh 60kW Integrated Solar Storage EV, 120kWh 60kW PV BESS EV Charging, 120kWh 60kW Photovoltaic Storage Charging Station, 120kWh 60kW BESS EV Charging Station.

Frequently Asked Questions

What battery capacity and charging power options are available?

MIDA integrated PV BESS EV charging stations are available in 120kWh/60kW, 200kWh/120kW, 261kWh/120kW, 418kWh/180kW and 522kWh/240kW configurations. The battery capacity (kWh) buffers solar and grid energy, while the charging power (kW) determines how fast connected electric vehicles are charged.

How does the solar + storage integrated charging station work?

The system combines photovoltaic input, a lithium iron phosphate (LFP) battery pack, a bidirectional PCS and an intelligent EMS. Solar energy is stored in the battery during the day and released to charge EVs on demand, reducing grid dependence and enabling fast charging even where grid capacity is limited.

Can the BESS charging station operate off-grid or grid-connected?

Yes. Both modes are supported. In grid-connected mode it performs peak shaving and demand-charge management; in off-grid mode the solar array and battery storage power EV charging independently, making it ideal for remote fleets, microgrids and areas with weak grid infrastructure.

How does energy storage reduce charging costs and demand charges?

The battery charges when electricity is cheap or from solar, then discharges during peak charging periods. This peak-shaving and load-shifting lowers demand charges, avoids costly grid upgrades and maximizes self-consumption of renewable energy, improving the total return on investment.

Is the lithium battery safe for commercial deployment?

Yes. MIDA uses automotive-grade LFP (LiFePO4) cells with a multi-level BMS, temperature monitoring, fire suppression and IP54/IP55 weatherproof enclosures, complying with IEC/UL safety standards for reliable 24/7 commercial and fleet operation.

Where are integrated BESS EV charging stations typically used?

They are ideal for commercial fleet depots, highway service areas, microgrids, remote and off-grid sites, logistics parks and locations with constrained grid capacity, delivering fast, clean and resilient EV charging with solar self-generation and energy storage.